All Words Any Words By Phrase

Go back to home page
Download Center
label
ribbon
printer
applicators
scanners
Banner

EDS Cleanscan

Specifications Data ID ESD Cleanscan

Physical Characteristics

Dimensions: 6.7" H x 3.4" D x 2.8" W/167 mm, H x 85 mm D x 70 mmW
Weight: 5.5 oz /156 gm without cable
Laser Class: CDRH Class II, IEC 825 Class II, IEC 825 Class I
Voltage: 00: 4.75-14 VDC; LS 2104: 120 mA Typical, 160 mA peak;
06: 120 mA Typical, 180 mA peak
Power Sources: 00: Power supplied by Interface controller; 04: Host
power or 9 volt battery which yields over 10,000 scans. 06: Host power or optional power supply is available
Cable: Removable 6 ft/1.8 m Cable - Standard

Performance Characteristics

Scanner Type: Bi-Directional, Retrocollective
Light Source: 670 nm visible laser diode
Scan Rate: 36 + 3 scans per second

Nominal Working Contact to 23"/57.5 cm

Distance

Field Width: 25"/62.5 cm at 23"/57.5 cm from nose of scanner
Print Contrast: 20% minimum reflective difference
Roll: +55 o at 6" on 100% UPC/EAN
Pitch: +50 o at 6" on 100% UPC/EAN
Yaw: +35 o at 6" on 100% UPC/EAN

Additional Information

Decode Capability: All major 1D Codes
User Environment Operating Temperature: 32 o to 104 o F/0 o to 40 o C
Storage Temperature: -40 o to 140 o F/-40 o to 60 o C
Humidity: 5% to 95% relative humidity, noncondensing
Drop Specification: Unit functions normally after repeated 5'/1.5 m drops to concrete
Ambient Light Immunity: Immune to direct exposure of normal office factory lighting conditions, as well as direct exposure to sunlight
  • EMI Generation: Conforms to FCC Class A Limits
  • Electrostatic Discharge: Conforms to 15 KV rating per IEC 801-2
  • ESD and Contamination test and certification on file
  • Regulatory: Complies with UL, CSA, VDE, CE, FCC Class A and B Limits
Results based on polymer analysis. Due to its recent introduction, limited scanning statistics exist. Product performance to date is consistent with these findings. Results are not guaranteed. Actual results may be process-related. Trademarks belong to their respective owners.

Lynx 2D Scanner Specifications

LYNX SCANNER FEATURES
   
  • Omni-directional scanning
  • Support most popular 1D, 2D and Postal codes
  • Autodiscrimination of linear and 2D codes
  • Image capture
  • Intuitive aiming
  • Multi-standard interface

APPLICATIONS
  • Shop floor:
    - WIP
    - Tracking
    - Quality Control
  • Document handling:
    - Front-Desk/Postal applications
    - Shipping & Receiving
GENERAL DESCRIPTION

Datalogic, the leading European manufacturer of Hand-Held CCD and Laser readers, further improves its offer with the introduction of a state-of-the-art and powerful "bi-dimensional" reader: the Lynx?.
Based on a matricial CCD sensor (640 x 480 pixel), the Lynx? allows "omnidirectional" reading of the most common 1D symbologies as well as a wide variety of 2D and stacked codes. Furthermore, the Lynx? can be used for "image-based" applications like signature capture, OCR and so on. In fact, with the Lynx? the user captures the whole image of the object to be identified no matter how it is orientated, thus avoiding any alignment constraint between the reader and the symbol/image to be read/captured.
The captured image can be processed on board for 1D or 2D symbologies, or downloaded in different formats for image processing on the host side.
Aiming at the image to be captured is really easy and intuitive thanks to the "double-click" trigger for Point & Read, and to the "five dot pointer" that mark the four corners and center of the reading area.
The Lynx? is available in two models that are specifically addressed to standard (D302) and high resolution (D302 E) codes. Both models are equipped with a multi-standard interface to allow connection to the host via RS232 or wedge emulation interface.
The software tool "visual setup" included in the Lynx? package allows easy configuration of all the parameters for personalizing the reader to the application, as well as a quick view of the downloaded images.
The Lynx? is suitable for applications in even the most demanding environments thanks to its rugged case and inIndustrialld electromagnetic protection. The Lynx's? Firmware can be in-field updated for easy maintenance and investment protection.

MODELS AND ACCESSORIES

Models

Lynx™ D302
2D Hand-Held reader

Lynx™ D302 E
2D Hand-Held reader for high resolution codes


Accessories

CAB362
RS232 coiled cable, 9-pin female connector (DCE config.)

CAB363*
RS232 coiled cable, 25-pin female connector (DCE config.)

CAB364*
RS232 coiled cable, 25-pin male connector (DTE config.)

CAB327
RS232 straight cable, 9-pin female connector (DCE config.)

CAB328*
RS232 straight cable, 25-pin female connector (DCE config.)

CAB320*
RS232 straight cable, 25-pin male connector (DTE config.)

CAB389
RS232/Beetle straight cable, 9-pin male connector

CAB391
IBM/PS2 wedge minidin external power supply

Operator's Manual
Software manual for Lynx™ series

PG110 (110 Vac)
Power supply unit 12 Vdc

PG220 (220 Vac)
Power supply unit 12 Vdc